voice 800-323-1798
360-895-2626
fax 360-895-1284
www.fairweathersf.com

sales@fairweathersf.com

<- Go Back

 

Standard Olympic Foundry Colors.

Satin Black

Gloss Black

Flat Black

Semi-gloss Black

Cardinal Red

DOT Green

Green

Traffic Green

Patina Green **

Rust **

Dark Blue

Mineral Bronze

Safety Yellow *

Harbor Gray *

* PLEASE NOTE: Due to a possibility of the rust 'bleeding' through lighter colors, primer undercoat is highly recommended for these powder coated finish colors. Please call for a revised quote if either of these colors are needed.

** Denotes textured powder coat finish

Optional Finishes

Unlike steel, cast iron is inherently resistant to continued corrosion. Standard unfinished ductile/gray iron will, over time, develop an attractive patina which will not damage the iron and requires no upkeep.

Products can also be provided prime-coated, electrostatically powder coated in any specific color, or galvanized. Other finishes can also be applied if needed to suit a particular demand.

Olympic Foundry's Ductile castings are available in a variety of standard powder coated colors. The color coating is either polyester or polyester TGIC powder finish, applied by dry electrostatic process. Following application, the metal parts are baked until properly cured.

Due to variable conditions, paint and powder coated finishes are not warranted on foundry products.

Color Variations

Note: Non Foundry (Fairweather manufactured) products have different standard colors
Depending on your monitor settings - Displayed COLORS MAY VARY from actual colors!
Additional colors may be available at an extra cost.
Contact your FairWeather representative for more information, or to get color samples.

Olympic Foundry products are distributed exclusively by FairWeather.